Your Raymarine tiller pilot is a totally self-contained autopilot designed. • To return to manual steering at any. 8 ST1000 Plus & ST2000 Plus Tiller Pilots.

AutoTack lets you handle the sheets while the pilot tacks the boat and AutoSeastate intelligently keeps the boat on course while conserving power. Whether used as a stand-alone pilot or with SeaTalk/ NMEA GPS, the clear backlit LCD and 6 button keypad make these pilots safe and easy to use. Recommended Maximum Displacement Raymarine ST1000: 3,000kg (6,600lbs) Raymarine ST2000: 4,500kg (10,000lbs) Remember to always take the fully laden displacement weight of your vessel into account (often 20% above the designed displacement). ST1000 & ST2000 Specifications ST1000 & ST2000 SPECIFICATIONS Model Raymarine ST1000 Tiller Pilots Raymarine ST2000 Tiller Pilots Part Number A12004 A12005 Recommended Maximum Displacement 6,600lbs (3,000kg) 10,000lbs (4,500kg) Require a tiller drive pilot that can handle higher displacement? Raymarine SPX-5GP is recommended up to 7,300kg. Power Supply 12V systems Absolute Voltage Range 10 - 16V DC Power Consumption 40mA Weight 1.53 (3.4) Mounting methods Reversible port or starboard Display size 45mm segmented LCD Display Lighting 3 levels plus off Connections NMEA 0183 input SeaTalk Thrust 125 lbs (57kg) 169 lbs (77kg) Stroke 236mm (9.3in). AutoTack lets you handle the sheets while the pilot tacks the boat and AutoSeastate intelligently keeps the boat on course while conserving power.

Whether used as a stand-alone pilot or with SeaTalk/ NMEA GPS, the clear backlit LCD and 6 button keypad make these pilots safe and easy to use. Recommended Maximum Displacement Raymarine ST1000: 3,000kg (6,600lbs) Raymarine ST2000: 4,500kg (10,000lbs) Remember to always take the fully laden displacement weight of your vessel into account (often 20% above the designed displacement). ST1000 & ST2000 Specifications ST1000 & ST2000 SPECIFICATIONS Model Raymarine ST1000 Tiller Pilots Raymarine ST2000 Tiller Pilots Part Number A12004 A12005 Recommended Maximum Displacement 6,600lbs (3,000kg) 10,000lbs (4,500kg) Require a tiller drive pilot that can handle higher displacement? Raymarine SPX-5GP is recommended up to 7,300kg. Power Supply 12V systems Absolute Voltage Range 10 - 16V DC Power Consumption 40mA Weight 1.53 (3.4) Mounting methods Reversible port or starboard Display size 45mm segmented LCD Display Lighting 3 levels plus off Connections NMEA 0183 input SeaTalk Thrust 125 lbs (57kg) 169 lbs (77kg) Stroke 236mm (9.3in).

] ST1000 Plus & ST2000 Plus Tiller Pilots Owner's Handbook Document number: 81130-5 Date: June 2005 2 ST1000 Plus & ST2000 Plus Tiller Pilots Autohelm, HSB (High Speed Bus), SailPilot, SeaTalk and SportPilot are registered trademarks of Raymarine Ltd. Raymarine, AST (Advanced Steering Technology), AutoAdapt, AutoLearn, AutoRelease, AutoSeastate, AutoTack, AutoTrim, FastTrim, GyroPlus, RayGyro, RayPilot and WindTrim are trademarks of Raymarine Ltd. Handbook contents © Raymarine Ltd 2005. 1 Contents Contents.................................................................................................... 1 Chapter 1: Introduction....................................................................................... 1 Overview................................................................................................ V Ray 2012 3ds Max there. ] Make sure that: dimensions A and B are at right angles to each other (as shown on the diagram opposite) the tiller pilot is mounted horizontally Chapter 4: Installing the Tiller Pilot 33 Basic installation After establishing control dimensions A and B, you can usually mount the tiller pilot directly onto the cockpit seat.

5 in) Mounting socket Tiller pin D3192-2 Installing the tiller pin 1. Drill a 6 mm (1/4 in) diameter hole to a depth of 25 mm (1 in) at the fixing point you have marked on the tiller. Position the shoulder of the pin so it is 12. Fear Of Flying Book Erica Jong there.

5 mm (1/2 in) above the tiller surface. Installing the mounting socket 1. 5 mm (1/2 in) hole to a depth of 25 mm (1 in) at the fixing point you have marked on the cockpit seat.

Membuat Ulir Dalam Di Autocad - Download Free Apps on this page. If the structure at the mounting position is less than 25 mm (1 in) thick, reinforce the underside with plywood bonded into position. Fix the mounting socket in place using a two part epoxy.